Avicraft Ltd

Futaba 6EX 2.4 GHz

The latest in radio transmitter technology. The Futaba 6EX 2.4 GHz system ensures clear and precise control of your model in all conditions. The 6EX boasts a six model memory and servo reversing capablities. End point adjustment for fine tuning servo throws. Dual/Exponential rate for ailerons, rudders and elevators and for peace of mind; fail safes to protect against signal failures.

The 6EX also has advanced programming functions that include:

• 5 Point Normal and Idle Up Throttle/Pitch Curves.
• Throttle Hold: For autorotation.
• Revolution Mixing: Mix rudder and pitch together.
• Gyro Mixing: Two gyro gain settings can be programmed and selected during flight.
• Swash to Throttle Mixing: Corrects slowing of the engine´s speed caused by the swashplate.
• Swashplate Types: Choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
• Swash Adjustable Function Rate: For use with 1S, 3S or 3E swash types.

These fantastic features enable the user to manipulate their model in ways never before conceived. The Futaba 6EX is a 21st century RC system for ensuring performance and exceeding expectations.

Continuious Channel Shifting:
Other 2.4GHz systems hold firm to one or two frequencies, increasing the potential for interference. The frequency of Futaba 2.4GHz FASST shifts every 2 milliseconds, so there are no signal conflicts or interruptions – and no need for a frequency pin!

Pre-Vision:
2.4GHz FASST scans incoming data and applies sophisticated error correction techniques – resulting in a system that gives you a solid, impenetrable connection with your model.

Dual Antenna Diversity:
Futaba 2.4GHz FASST systems seamlessly select the best reception between two receiver antennas, so there´s no loss of signal.

Easy Link:
Futaba 2.4GHz FASST system transmitters leave the factory with a unique and permanent ID code. Once linked to the receiver, the code ensures that the receiver will recognize and respond ONLY to that transmitter. The linking process is simple...just push a button on the receiver.

Custom-Developed IC Chips:
Futaba uses custom IC chips that have been designed specifically for radio-control – ensuring quality, reliability, and safety. This is why Futaba FASST systems are faster and more reliable than the competition.

Compact, "All-in-One" Receivers:
Futaba´s small, powerful 2.4GHz FASST R606FS and R607FS receivers for flight systems can control giant-scale models as easily as park flyers and weigh a scant 7 grams without case. Full-range systems from other manufacturers include a bigger, two-piece receiver, and you must purchase a smaller park flyer receiver separately.



Over 2x Less Minimum Latency:
Latency is the elapsed time between your movement of the transmitter controls and servo response. In Futaba 2.4GHz FASST systems, that response can happen over twice as fast – so you feel less like you´re "out in front" leading your model, and more like you´re inside driving or flying it.

100x Faster Antenna Switching:
If the receiver notices a problem with the data coming into one antenna, it rapidly switches to the other, looking for the sharpest signal.

Stronger, More Robust Link:
Futaba doesn´t need redundant receivers. Instead, we use a combination of Channel Shifting and Dual Antenna Diversity (DAD) to provide a robust, highly dependable link between transmitter and receiver.

Hassle-Free Fail Safe:
Futaba 2.4GHz´s Fail Safe is programmed right through the transmitter on the 6EX, just like on conventional systems. The competitor´s radios require a complicated six-step process to set up their Fail Safe, along with a separate binding plug that can easily be misplaced.

AVICRAFT SUPPLY THE LATEST NEW FUTABA 6EX 2.4ghz FASST RADIO SYSTEM,MODE 2 (throttle left) COMPLETE SET WITH 4XS3003 SERVOS NICAD TX/RX AND DUAL CHARGER,AIRCRAFT AND HELI FUNCTIONS,6 MODEL MEMORY. UK SUPPLIED FROM RIPMAX WITH FULL WARRANTY.

Call for Latest Pricing

---